Skip to content
Crowne Leveling Clips (400 pcs)

Crowne Leveling Clips (400 pcs)

by Crowne Tools
SKU CROWNECLIPS116
$29.95 - $29.95
$29.95
$29.95 - $29.95
$29.95
Size: 1/16"

Clip-and-wedge leveling clips that pull adjacent tiles into the same plane and kill lippage as the mortar sets — 400 to a bag for whole-floor jobs.

More Details

The working half of a clip-and-wedge tile leveling system — the single-use clip base that a wedge drives into to hold adjacent tiles flat.

  • Quantity: 400 clips per bag
  • System: Clip-and-wedge tile leveling
  • Role: Single-use base; sits under adjacent tile edges
  • Best for: Large-format, lippage-free floors
  • Pairs with: Crowne Wedges (sold separately)
Shipping & Return Policies

Shipping Policy

Refund & Return Policy

Crowne Leveling Clips — Flat Floors, Zero Lippage

Large-format tile shows every imperfection, and even a hair of lippage between tiles catches the eye and the toe. Crowne Leveling Clips are the working half of a clip-and-wedge leveling system: the clip slips under adjacent tile edges, and a wedge drives in on top to pull those tiles into the same plane and hold them there while the adhesive cures. The result is a dead-flat surface with clean, even joints — no high corners, no lippage.

At 400 clips per bag, there's enough here to level a whole floor without running short mid-job. Pair them with Crowne Wedges to complete the system — the clips are the single-use base, the wedges do the squeezing and pull back out for the next set.

Why Tile Pros Choose It

  • Kills lippage: Pulls adjacent tiles into the same plane as the mortar sets
  • Large-format ready: Keeps big, unforgiving tile flat and even
  • Clean joints: Holds consistent spacing while the adhesive cures
  • Fast to set: Slip the clip, drive the wedge, move on
  • System fit: Works hand-in-hand with Crowne Wedges
  • Bulk count: 400 per bag — enough for whole-floor jobs
  • Honest about its role: The clip gives its life so your floor can be flat

Pro tip: Set clips a consistent distance from each tile corner and along long edges where lippage shows most, and don't over-drive the wedge — snug until the faces pull flush, no more. Once the adhesive has cured, knock the clips off parallel to the joint so the base snaps cleanly below the surface.