Omni Concentrated Cleaner – 70 Gallons of Everyday Tile & Stone Cleaning in One Bottle

Most "everyday" cleaners are mostly water, and you pay to ship every drop. Omni Concentrated Cleaner flips that. You add the water on site at just 1 to 2 ounces per gallon, so a single 70 oz bottle turns into as much as 70 gallons of working solution. That's roughly 5,000 to 10,000 square feet of tile, stone, grout, concrete or masonry cleaned from one bottle on the shelf.

The cleaning power comes from Omni's proprietary surfactants. They lift dirt, contaminants and stains off the surface so they mop and rinse away instead of getting pushed around. With regular use it also keeps soap scum and hard water buildup from forming, which makes it a strong fit for showers, kitchens and high-traffic floors. It's non-toxic, non-flammable, biodegradable and VOC compliant, and it leaves behind a clean rosemary scent instead of a chemical one.

Why Tile Pros Choose It

• Serious yield: One 70 oz bottle makes up to 70 gallons of cleaning solution
• Adjustable strength: Mix 1 oz per gallon for routine cleaning, or 2 oz when the surface needs more
• Lifts, doesn't smear: Proprietary surfactants release dirt and stains so they rinse away clean
• Prevents buildup: Regular use helps stop soap scum and hard water deposits before they start
• Works on nearly everything: Tile, stone, concrete, masonry and grout, inside and out
• Smells like rosemary, not a hazmat drill: Your client's bathroom will smell like an herb garden instead of a chemical plant
• Safer to have around: Non-toxic, non-flammable, biodegradable and VOC compliant

How to Use

1. Sweep or vacuum to remove loose debris.
2. Mix 1 to 2 oz of Concentrated Cleaner per gallon of water.
3. Apply liberally with a sponge, mop or brush, and let it dwell for up to 5 minutes.
4. Agitate with a white nylon scrub pad, natural-bristle brush or other non-marring scrubber until clean.
5. Mop up the dirty solution. A wet/dry vac also works.
6. Rinse thoroughly with clean water, changing the rinse water at least every 250 sq. ft.
7. Wipe completely dry with a clean white cotton or microfiber towel.

Pro Tip: Planning to seal? Clean with Concentrated Cleaner, let the surface dry for a full 24 hours, then apply Omni Penetrating Sealer, Omni Elite Sealer or Omni Enhancing Sealer. If the floor is badly neglected, knock it down first with Omni Heavy Duty Cleaner, then switch to Concentrated Cleaner for ongoing maintenance. Leaving a bottle with the homeowner at the end of the job is an easy way to keep your work looking new. Heavily soiled surfaces may need more than one application on first use.

Caution: For water-safe surfaces only. May be harmful if swallowed and may irritate eyes and skin. Wear skin and eye protection. Keep out of reach of children.

Technical Data Sheet (PDF) | Safety Data Sheet (PDF)