Gauged porcelain panels and large-format tile are unforgiving: set one on a bench that flexes, sags, or sits unevenly and you risk a crack before you've made a single cut. Sawhorses and makeshift tables don't cut it. The Sigma 63G gives big tile what it actually needs — a genuinely flat, rigid, dependable platform — in a bench light enough to carry and clever enough to fold into a box at the end of the day.
It's built to adapt to the panel in front of you. The tabletop expands from 38" to 65" wide in preset steps, so it supports everything from standard large-format tile to wide slabs, and it sets to two working heights (32-1/4" or 35-1/2") to suit you and the task. The lightweight aluminum frame still carries about 440 lb, and its planks reposition easily to open a work-through gap right where you need to score and snap. Need more length? Connect a second 63G for a continuous run up to about 11.8 ft.
What makes it a system rather than just a table is what bolts to it. The 63G is designed to mount Sigma's large-format equipment — the Kera-Cut scoring rail for straight cuts on big panels, the Simple Bevel for edge finishing, and the J-PRO for jolly miters — turning one bench into a full fabrication station. When the job's done, the legs fold and the whole thing breaks down in minutes to store or transport. Outfitting a crew? The 63G Kit pairs two tables with clamps, risers, and Kera-Cut hooks.
Pro tip: Set the height before you load a panel, not after, and reposition the planks to leave a clear gap under your score line so the break has somewhere to go. Level the bench on the floor first — a flat tabletop only helps if the whole bench sits true.
